Windsurf
Severne Gorilla RDM Mast
SEVERNE RDM GORILLA
EXTREME DURABILITY, ULTIMATE RELIABILITY 2 year, no questions asked, limited warranty. Adding 300 and 320 sizes for extreme reliability and performance masts in small wave sail sizes and Redback rigs. / 2 YEAR NO QUESTIONS ASKED LIMITED WARRANTY / +7 MEASURED OFFSET ACCURACY 300 / 320 / 340 / 370 / 400 / 430 / 460
Severne Blue RDM Mast
RDM BLUE
The RDM Blue has an added fiberglass outer layer which makes it stronger and less susceptible to impact damage. Also offers wave mast durability for freeride and RDM Cam sails. (OverDrive, Turbo GT)
Severne Red RDM Mast
RDM RED
2026 Severne Mach 9 Windsurfing Sail – Red
MACH 9 _PRO SLALOM
ENGINEERED TO WIN.
Nine generations of race-winning evolution create instant acceleration from first contact. The Mach 9 hits maximum performance instantly – no wind-up time, no delay. New CarbonFusion strips eliminate stretch where it matters most. Enhanced construction on mid sizes (5.5, 6.5) adds the stiffness that translates to better low-end response and acceleration. Crucial for starts and fighting for position in traffic. Finer entry profiles slice through any wind state with minimal drag. Adjusted boom lengths match the power delivery needed for each size. Size specific tuning: 5.0 runs softer for high wind control, while larger sizes (7.5, 8.5) focus on improved low end power with higher centre of lift placement for more powerful profiles. Xtended Range technology delivers bigger gaps between sizes. Deeper, more powerful profiles locked in place with added skin tension enhance control and stability at both ends of the wind range. Engineered to win. / MACH 9 UPGRADES / Direct power transfer even when not fully loaded / New CarbonFusion strips eliminate stretch / Enhanced mid-size construction for low-end response / Finer entry profiles reduce drag / Size specific power tuning SIZES 5.0 / 5.5 / 6.5 / 7.5 / 8.5
FBC RAD Footstrap
Most footstraps rely on internal plastic structural inserts to maintain shape and support. These inserts are essential for performance — but they are also the reason many straps cause pressure points and sore spots. The sharp edges of the plastic can dig into your foot over time.
Most brands attempt to mask this by simply adding two flat layers of neoprene over the plastic.
We engineered a better solution.
The Pro+ uses a custom-developed moulded EVA pad that fully encapsulates the internal plastic structure. By forming the EVA around the plastic components, we eliminate hard edges and pressure points at the source — not just cover them up.
The result:
• Structural rigidity where it’s needed
• Zero sharp edge pressure
• Even load distribution across your foot
Comfort and performance without compromise.
Premium Materials — No ShortcutsWe’ve also upgraded the outer layer to a super-soft 3mm premium neoprene, providing flexibility and comfort that cheaper 2mm neoprene simply cannot match.
Where many straps use thin, stiff neoprene that creases and becomes uncomfortable, the Pro+ remains supple, forgiving, and comfortable even during long, powered sessions.
Designed for ControlFoiling demands precision. Pumping, carving, boosting and high-load manoeuvres all rely on a stable connection to your board.
The Pro+ delivers:
-
High-density structural core that maintains shape under load
-
Reinforced stitching for long-term durability
-
Ergonomic pre-curve for natural foot alignment
-
Optimised padding density without unnecessary bulk
-
Foil-specific design for wing, pump and downwind disciplines
The Pro+ badge means one thing:
No compromise in materials. No compromise in design.
We didn’t build this strap to hit a price point. We built it to outperform everything else on the market.
FBC Footstrap – Black
Most footstraps rely on internal plastic structural inserts to maintain shape and support. These inserts are essential for performance — but they are also the reason many straps cause pressure points and sore spots. The sharp edges of the plastic can dig into your foot over time.
Most brands attempt to mask this by simply adding two flat layers of neoprene over the plastic.
We engineered a better solution.
The Pro+ uses a custom-developed moulded EVA pad that fully encapsulates the internal plastic structure. By forming the EVA around the plastic components, we eliminate hard edges and pressure points at the source — not just cover them up.
The result:
• Structural rigidity where it’s needed
• Zero sharp edge pressure
• Even load distribution across your foot
Comfort and performance without compromise.
Premium Materials — No ShortcutsWe’ve also upgraded the outer layer to a super-soft 3mm premium neoprene, providing flexibility and comfort that cheaper 2mm neoprene simply cannot match.
Where many straps use thin, stiff neoprene that creases and becomes uncomfortable, the Pro+ remains supple, forgiving, and comfortable even during long, powered sessions.
Designed for ControlFoiling demands precision. Pumping, carving, boosting and high-load manoeuvres all rely on a stable connection to your board.
The Pro+ delivers:
-
High-density structural core that maintains shape under load
-
Reinforced stitching for long-term durability
-
Ergonomic pre-curve for natural foot alignment
-
Optimised padding density without unnecessary bulk
-
Foil-specific design for wing, pump and downwind disciplines
The Pro+ badge means one thing:
No compromise in materials. No compromise in design.
We didn’t build this strap to hit a price point. We built it to outperform everything else on the market.
Goya Eighty Pro 80% RDM Windsurfing Mast
Eighty Pro
RDM Reduced Diameter Mast
80% Carbon – Strength, Lightness, and Feel Our strongest mast is now lighter than our previous 90% carbon model—and quicker, too. With an incredibly responsive feel, it has become the team’s go-to choice in overhead waves and for withstanding the rigors of travel. The perfect balance of durability, reflex, and weight.
Not All Masts Are Created Equal On paper, many masts might share similar specs—constant curve, matching IMCS, bend percentages, or comparable weights. But true performance goes far beyond the numbers. What sets Goya masts apart is consistency—from premium materials to precision engineering. We use only Toray prepreg carbon fiber, the global benchmark in composite performance. Unlike many prepregs made in-house without environmental controls, Toray’s prepreg is cured under precisely regulated temperature and pressure, with exact fiber-to-resin ratios. The result is Direct Drive—a fast, clean reflex that loads and releases with exceptional control. Because performance isn’t just about how a mast bends—it’s about how quickly it recovers, delivering what we call true IMCS.
Goya Carbon Pro Boom
Reduced Diameter Boom
Our workhorse carbon boom. The Carbon Pro features the same 100% prepreg carbon monocoque body & extension as the Carbon Skinny Pro.
The grip on both builds is in line with what most riders consider comfy these days, slimmer than standard booms. Smaller sizes are 27.5 mm, larger models are 30 mm. Comes with the proven double pin locking system. With four sizes, this boom spans a great range of sails and has been a favorite with a vast number of riders for a long time. Both builds come with wide and stiff tail ends, and lengths of up to 250 cm.Please note that any indicated diameters describe the boom tube without grip tape. The grip tape has an additional thickness of 1.5 mm (times two to calculate overall diameter).
Available in 140-190, 160-210, 180-240, and 200-250 centimeters.
Adaptor allows use with RDM and SDM masts.
New optimized lay-up.
Goya booms fit both RDM and SDM masts for added range and versatility. By using the RDM shim you need to add 2 cm in your boom length measurement. Example: To achieve a 156 cm boom length, on an RDM mast, with the RDM shim in place, the boom needs to be set to 158 cm.
Goya Carbon Skinny Pro Boom
Minimal Diameter Boom
Our top of the line ergonomic performance boom.
The Carbon Skinny Pro comes as a 100% prepreg carbon monocoque body and extension. Its 24.5 mm grip takes diameter reduction one step further. Comfort. Control. It’s hard to get the team on anything else these days. New with a wider tail end & stiffer tubes. This boom is about as stiff and strong as you can get in the market, nay in carbon technology at large. Double pin locking guarantees a firm fit and ample load distribution between the boom body and the boom extension. This boom is a no compromise high performance product and features modern wide and stiff tail ends. Built with 33msi pre-preg carbon.Please note that any indicated diameters describe the boom tube without grip tape. The grip tape has an additional thickness of 1.5 mm (times two to calculate overall diameter).
Available in 125-175, 130-180, 140-190, and 150-200 centimeters.
Adaptor allows use with RDM and SDM masts.
New optimized lay-up.
Goya booms fit both RDM and SDM masts for added range and versatility. By using the RDM shim you need to add 2 cm in your boom length measurement. Example: To achieve a 156 cm boom length, on an RDM mast, with the RDM shim in place, the boom needs to be set to 158 cm.
Goya Obi Pro Harness *Blue in stock*
Description.
What you have been waiting for. The introduction of performance. By Windsurfers for Windsurfers.Francisco Goya: I wanted just what I needed. Nothing else. We went as small as possible and beyond, until we realized that we had reached the end of that. As small as possible, as thin as possible, as light as possible, as simple as possible, from the tip of the hook to the buckles, to the comfort. Fixed or sliding. We didn’t want any gimmicks or compromises, and we tested for over a year, and it felt fresh all along. Everything was questioned and tested. Your body and rig become one. I couldn’t be more stoked.
We’re excited to introduce the first ever harness by Goya Windsurfing. The Obi Pro is a hardshell minimalist windsurfing harness, built for dedicated performance and comfort. Delivering support, direct power transfer and maximum mobility, all in a modern super lightweight package.
Materials: 30% Neoprene, 30% Polypropylene, 20% Polyethylene, 10% Nylon, 5% Polyester + 5% Stainless Steel.
2026 Goya Custom Thruster 5 Pro Carbon
Description.
The new Custom Thruster 5 is our fastest, all-around waveboard, making it a must-have in any quiver or conditions. It blends the best design elements of both the Quad 9 and One12, delivering our fastest wave board to date with top manoeuvrability and range.This board is designed to be intuitive, like the Quad 9, with the earlier planning and speed, like the One12. It has a slightly longer, wider outline than our Quad 9, providing a faster, more stable platform, excelling at jumping and cross onshore-to-onshore riding, and the best all-round experience.
The new shapes and construction feel faster, looser, and more powerful, offering top world wave performance. A refined building process with lighter, higher-density foam in varying thicknesses throughout, and continuous Carbon/S-Glass layering contribute to our best and lightest Custom Thruster ever, elevating wave performance to a new level of speed and fun.
2026 Goya One 13 Carbon
Description.
The recipe for the One begins with a Custom Thruster base shape, a Slalom‑inspired rocker, and Bump & Jump freeride geometry. Generation 13 takes this proven foundation and elevates it with a new lighter construction, transforming the way the board feels underfoot. By reducing weight, every characteristic is amplified: the board accelerates more quickly, responds more instantly, and delivers a smoother, more connected ride across all conditions.The lighter build also enhances agility, making transitions from planing to flying over chop to carving through jibes feel effortless and natural. Sustainability plays a role too, with the removal of the deck sticker in favour of a mightier transfer. The Powerbox system in 95l – 125l supports larger fins and a simplified setup with a single screw from the deck. Whilst the smaller 78l and 85l come with US Boxes for added weight saving and more tuning range. The result is a board that fuses explosive speed, extended range, and ultimate comfort into one package.
With optimized volume flow, reduced weight, and a compact outline, the One 13 Carbon puts all the power directly beneath the rider, offering unmatched control, responsiveness, and confidence whether freeriding, jumping, or charging through long, choppy runs. Generation 13 is not just lighter—it’s livelier, faster, and more engaging than ever before.
2026 Goya One 13 Carbon Haiku Package
Description.
The recipe for the One begins with a Custom Thruster base shape, a Slalom‑inspired rocker, and Bump & Jump freeride geometry. Generation 13 takes this proven foundation and elevates it with a new lighter construction, transforming the way the board feels underfoot. By reducing weight, every characteristic is amplified: the board accelerates more quickly, responds more instantly, and delivers a smoother, more connected ride across all conditions.The lighter build also enhances agility, making transitions from planing to flying over chop to carving through jibes feel effortless and natural. Sustainability plays a role too, with the removal of the deck sticker in favour of a mightier transfer. The Powerbox system in 95l – 125l supports larger fins and a simplified setup with a single screw from the deck. Whilst the smaller 78l and 85l come with US Boxes for added weight saving and more tuning range. The result is a board that fuses explosive speed, extended range, and ultimate comfort into one package.
With optimized volume flow, reduced weight, and a compact outline, the One 13 Carbon puts all the power directly beneath the rider, offering unmatched control, responsiveness, and confidence whether freeriding, jumping, or charging through long, choppy runs. Generation 13 is not just lighter—it’s livelier, faster, and more engaging than ever before.
2026 Goya Custom Quad 9 Pro Carbon
Description.
The new Goya Quad 9 builds on the proven speed, ease of use, and wave-riding confidence of the Quad 8, while introducing a host of performance upgrades. Designed with a slightly more pulled-in nose and a progressive rocker curve, the Quad 9 delivers a tighter turning radius, while retaining the effortless glide riders loved in the previous generation, adding acceleration and top-end speed.The new Pro Carbon construction is now lighter than earlier versions, The new shapes and construction feel slippier, looser, and more rail-to-rail-oriented, offering performance once reserved for custom boards only. A refined building process with lighter, higher-density foam in varying thicknesses throughout, and continuous Carbon/S-Glass layering contribute to our best and lightest Custom Quad ever, elevating wave performance to a new level of precision and flow.
Windsurfing at Andy Biggs Watersports